42 Comments

1. 

   IOSEFO NADUVA on 22 January 2014 at 12:49 PM

   Do I need qualification to do the course on slinger and banksman

2. 

   Siôn Jones on 22 January 2014 at 1:40 PM

   Only an up to date CSCS health and safety test.
   We also offer this as part of the course!
   thanks

3. 

   Susan cullen on 14 July 2014 at 9:00 PM

   Hi I’m interested in becoming a banks women /slinger how do I go about training and coursess

4. 

   Siôn Jones on 16 July 2014 at 11:37 AM

   Susan,

   Thanks for getting in touch.

   Some of the best banksmen i’ve come across have been female. You would be very welcome to join our next A40 CPCS course which on the 1st September.

   I’ve sent you an email with more info.

   Thanks again,

5. 

   abdul on 13 February 2016 at 9:15 PM

   no experience in construction industry would love to do the slinger/banksman course

6. 

   Siôn Jones on 26 February 2016 at 4:03 PM

   I have sent you an email Abdul. Thanks

7. 

   Emmanuel on 26 April 2016 at 9:44 PM

   I am interested in starting the course

8. 

   Garry stanbury on 29 May 2016 at 11:33 AM

   Hi,
   I currently have a Cscs card and I want to do a slinger banksman course is this possible and would I need tibdobmy Cscs again although it is fairly new.

9. 

   Siôn Jones on 31 May 2016 at 8:05 AM

   Garry, no need to do your CITB health, safety & environment test again if you’ve passed it within the last two years. Thanks.

10. 

    John on 13 January 2017 at 9:38 AM

    How do I become a banksman ??

11. 

    Siôn Jones on 30 January 2017 at 12:29 PM

    Hi Johnathan,

    We offer a CPCS Slinger/Signaller (All duties) course over 4 days. This would then give you a red CPCS card valid for 2 years. You would also need to complete a CSCS health and safety test if you have not completed one in the last 2 years.

    Hope this answers your query. If you have any further questions then please do not hesitate to contact us.

12. 

    stephen on 27 March 2017 at 9:15 AM

    hi

    i have no experience in construction but want to pursue a career in construction

13. 

    Marrie Inman on 29 March 2017 at 11:27 AM

    Hi Stephen

    Thanks for contacting us. I have sent you an email with all the relevant information regarding CPCS A40A Slinger/Signaller Courses. Thanks

14. 

    Nabil on 9 April 2017 at 11:12 AM

    I have a green cscs card and want to become a banksman slinger what course do i need and whats the diffirence between cscs and cpcs

15. 

    Marrie Inman on 12 April 2017 at 3:10 PM

    Hi
    Thanks for contacting us.I have sent you an email regarding the CPCS A40A Slinger Signaller Courses. Thanks

16. 

    David Needes on 9 May 2017 at 4:19 PM

    Hi
    I have done the safety test a few months back.

    I am a level 4 option approved banksman slinger

    What do I need to do next ?

17. 

    David Needes on 9 May 2017 at 4:20 PM

    I have worked on ships and offshore for the last 10 years but I am looking for work ashore.

18. 

    Siôn Jones on 26 May 2017 at 5:19 PM

    David, you will need to sit your CPCS slinger/ signaller test. For experienced operators we offer a 1 day refresher course and test the following day. If you are interested in booking on, please give us a ring on 01269 844155. Thanks.

19. 

    Rhys on 17 July 2017 at 1:35 PM

    Hi there,

    I am interested in changing careers from my current office based role into becoming a Slinger.

    Would youbbest able to send me across some details please, also do you think it’s a viable option for someone without a construction background?
    Thanks
    Rhys

20. 

    Siôn Jones on 18 July 2017 at 12:22 PM

    Rhys,

    Rhys,

    Thanks for getting in touch.

    I think a slinger/ signaller is a good place to start if you have an interest in heavy lifting within the construction industry. The course will offer you the basics upon which you can develop. We can also steer you in the direction of potential employers and agencies to help you towards gainful employment.

    I have sent you an email with some details regarding our next courses and costs.

    Thanks again,

    Team ACOP

21. 

    Vesselin Laftchiev on 22 July 2017 at 12:18 AM

    I am wanting to change my career offshore where i have a banksman slinger stage 3, iam wondering how i can get into the construction industry. I have many years of banking under my belt , but i think my cert does not cover construction.

22. 

    Siôn Jones on 1 August 2017 at 8:48 PM

    Vesseilin,

    Thanks for getting in touch.

    Unfortunately, the offshore qualifications are rarely accepted in construction.

    For experienced slingers like yourself, we offer a 1 day course under the CPCS (Construction plant competence scheme) and test.

    Here’s a link to the questions that form part of the current A40 slinger/ signaller test, which should give you a better idea of whats involved.

    Let us know if we can be of further assistance?

    Team ACOP

23. 

    Ivolma on 19 August 2017 at 9:37 PM

    Hi there

    I’m interested in becoming a banksman slinger how does construction work for women,what do I need to do first

24. 

    Siôn Jones on 11 September 2017 at 6:38 AM

    Ivolma,

    Thanks for getting in touch.

    We offer a 4 day CPCS slinger/ signaller course all-duties.

    Although you will need to first complete the CITB Health, Safety & Environment test (for operatives and specialists).

    I have sent you an email

    Thanks again,

    Team ACOP

25. 

    Andrew Lloyd on 8 October 2017 at 2:34 AM

    I have worked in construction for over twenty years ,
    I have put my hand to formwork , sitefitting/erecting,
    Carpentry/ brickwork
    But I decided to becom a slinger .
    I have Noticed in the past five years a massive surge of so called slingers / supervisors and app’s who have no clue in basic lifting techniques, lifting accessory’s and apparatus;
    I have seen one fatality and seen countless near misses ,
    I would strongly advise anyone wishing to become a slinger to gain a minimum of two years experience on site.

    Four days in a training center doesn’t compensate for hands on experience.

26. 

    Jake on 31 October 2017 at 5:16 PM

    I am wanting to change my career from a factory job to a slinger could you email me info about how i do this

27. 

    Ryan on 13 November 2017 at 12:09 PM

    Passed my cscs and just passed my cpcs slinger signaller course !

    Just looking for a job now but there mostly saying they need experience/ references

    Is there agencies what can help me with this? I’m in Milton Keynes / Northampton area

    Thanks Ryan

28. 

    Reece on 15 November 2017 at 7:26 PM

    Hi I woul like to my course to become a banks man how would I get my ticket please

29. 

    Siôn Jones on 23 November 2017 at 11:16 AM

    Jake, we offer a 4 day course for the CPCS slinger/ signaller (all duties) category. This will give you a good introduction to the industry and the role of the slinger/ banksman.
    I have also sent you an email.
    Thanks again,
    Team ACOP

30. 

    Siôn Jones on 23 November 2017 at 11:54 AM

    Reece, thanks for your comment. I’ve sent you an email with the steps to become a qualified banksman (slinger/ signaller) within the construction industry.

    Hope to hear from you soon.

    Regards,

    Team ACOP

31. 

    abdul on 11 February 2018 at 3:21 PM

    hi are there courses based in London by any chance?

    thank you.

32. 

    Siôn Jones on 16 February 2018 at 8:55 AM

    Abdul,

    I’m afraid not. Was there anything in particular you were interested in and I’ll send you a quote?

    Thanks,

    Team ACOP

33. 

    Matt on 20 April 2018 at 5:17 AM

    Hi, interested in a career change and becoming a slinger/banksman. No prior experience. Please can you advise on course costs and employment prospects with no site experience? Thanks.

34. 

    Siôn Jones on 18 May 2018 at 11:05 AM

    Matt,

    Thanks for getting in touch.

    We run a 4 day CPCS slinger/ signaller course for novices.

    Once you have sat and hopefully passed the course you will be able to apply to a few operator agencies for a start as a slinger/ signaller. Alternatively you could contact a few employers that may be recruiting in your area. There are also a few groups on Facebook for CPCS operators and jobs that are often posting work and the going rates.

    If you’d like to discuss this further please get in touch. I have sent you an email.

    Team ACOP

35. 

    Paul on 29 August 2018 at 3:12 PM

    I have a green cscs card and want to become a banksman slinger what course do i need and whats the diffirence between cscs and cpcs

36. 

    Siôn Jones on 3 September 2018 at 11:45 AM

    Paul,

    Thanks for your comment.

    CPCS (construction plant competence scheme) is the card scheme for lifting/ plant operators but also includes the CSCS (construction skills certification scheme) hallmark as part of it.
    We offer a 4 day CPCS slinger/signaller course towards this qualification.

    I have sent you an email with some more information.

    Hope to hear from you soon.

    Thanks again,

    Team ACOP

37. 

    Peter Thompson on 28 September 2018 at 7:58 PM

    I am already working as a banksman at a very busy recycling centre, but I am not required to do any slinging. I love the job but my current employer doesn’t seem to offer any further training or enhancements and the pay is pretty low.
    I am very interested in taking this course to enhance my career. I have never done a CITB health and environmental course.

38. 

    Siôn Jones on 9 October 2018 at 9:02 AM

    Hi Peter

    Thanks for getting in touch.

    We offer the CPCS A40A Slinger/signaller (All Duties) course – this is a 4 day course for novices.

    The training takes place at our centre in South Wales.

    Prior to attending a CPCS course, you will need to pass the CITB Health Safety and Environment test for Operatives (CSCS), the cost for this is included within the course cost.

    If you require any further information, then please do not hesitate to contact us.

    I have sent you an email with some more information.

    Thanks again,

    Team ACOP

39. 

    Seth Holland on 16 February 2019 at 7:02 PM

    Hello,
    I’m planning on getting my cpcs card, but am concerned that without experience, I’ll have a hard time getting a job.

    What would you suggest?

    Kind regards,
    Seth Holland

40. 

    Siôn Jones on 26 March 2019 at 9:11 AM

    Seth,

    Thanks for getting in touch.

    We find that most people starting off on plant machinery will work through an agency. With this in mind, it may be worth ringing around a few agencies in your area to find out which categories are most in demand, and that way you can tailor your training around them.

    However, i’m led to believe that there is a shortage of plant operator at present, so i’m sure you will be fine with most categories. What are are you most interested in?

    I have sent you an email

    Thanks again,

    Siôn

41. 

    Ola on 27 November 2023 at 1:17 PM

    How do I become a slinger operator?

42. 

    Siôn Jones on 29 November 2023 at 3:42 PM

    Hi

    Thanks for getting in touch.

    To become a Slinger/Signaller you will need to attend a CPCS A40A Slinger/Signaller Course.

    It’s a 4 day course, with a maximum of 3 learners per course.

    Feel free to take a look at our calendar for upcoming courses.

    Prior to attending a course, you will need to pass the CITB Health Safety & Environment test for operatives, unless you have already passed within the last 2 years.

    If you require any further information, please do not hesitate to contact us.

    Kind regards

    Marrie Inman

This site uses Akismet to reduce spam. Learn how your comment data is processed.