Ride on roller training (November 2021)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (October 2021)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (October 2021)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (August 2021)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (April 2021)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (March 2021)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (November 2020)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (November 2020)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
Ride on roller training (September 2020)
A three day course for a CPCS ride on roller (A31). Maximum of 3 learners. This is a course designed for novice operators. The aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a roller operator. This qualification covers ride-on rollers Through a combination of targeted training and experience, an individual with the Ride on Roller will be able to: Roles and responsibilities Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work Name and explain the purpose of principal components, the basic construction, controls and terminology Conform with manufacturer’s requirements as per the operator’s handbook, other types of information source and relevant regulations and legislation Undertake all pre-use and running checks Travelling and manoeuvring Configure and set for site travel Travel over rough, undulating ground, substantial inclines and level surfaces Manoeuvre in confined spaces Setting up for work Configure and set for compacting duties Explain actions required for hazards, underground and overhead services Working tasks Compact loose granular materials to specification Compact in straight lines and around radii Compact supported and unsupported edges Explain the principles, requirements and techniques of good compaction Shutting down Carry out shut down and securing procedures Explain the loading and unloading procedures for machine...
ACOP is an award-winning company offering a one-stop solution for training and plant hire for the construction industry.
Reviews by ACOP trainees
John Patrick McInerney
2021-04-27T11:19:15+0000
I would recommend this company, in a heartbeat.
I did the 360 excavater course, with Mike and Darren. They were both... incredibly knowledgeable, informative who help you to operate the machine when you get to site and not just pass the test, both also have a great calming effect on the trainees.
Also the office staff were incredibly helpful and accommodating. Thank you all
Johnread more
Ben Michael
2021-04-23T11:21:04+0000
Big thank you to mike and darren for giving me the knowledge and skills needed to pass my a59 over 10 tonne tracked... excavator ticked. A1 service with ACOP.. very professional.. Would highly recommendread more