360 Excavator training – short duration course (January 2020)

360 Excavator training – short duration course (January 2020)

by | 20 Jan 2020 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (December 2019)

360 Excavator training – short duration course (December 2019)

by | 9 Dec 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (November 2019)

360 Excavator training – short duration course (November 2019)

by | 18 Nov 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (October 2019)

360 Excavator training – short duration course (October 2019)

by | 28 Oct 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (September 2019)

360 Excavator training – short duration course (September 2019)

by | 23 Sep 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (August 2019)

360 Excavator training – short duration course (August 2019)

by | 12 Aug 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (July 2019)

360 Excavator training – short duration course (July 2019)

by | 1 Jul 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (April 2019)

360 Excavator training – short duration course (April 2019)

by | 29 Apr 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (March 2019)

360 Excavator training – short duration course (March 2019)

by | 4 Mar 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (January 2019)

360 Excavator training – short duration course (January 2019)

by | 14 Jan 2019 |

We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring   • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks   • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...