360 Excavator training – full foundation course (October 2019)
We are running a CPCS tracked 360 excavator course (A59A). The course runs across ten days, on weekdays. This course is designed for new or novice operators and covers the basics in excavator operation and maintenance, with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (September 2019)
We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – full foundation course (September 2019)
We are running a CPCS tracked 360 excavator course (A59A). The course runs across ten days, on weekdays. This course is designed for new or novice operators and covers the basics in excavator operation and maintenance, with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (August 2019)
We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (July 2019)
We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – full foundation course (June 2019)
We are running a CPCS tracked 360 excavator course (A59A). The course runs across ten days, on weekdays. This course is designed for new or novice operators and covers the basics in excavator operation and maintenance, with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (April 2019)
We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – full foundation course (April 2019)
We are running a CPCS tracked 360 excavator course (A59A). The course runs across ten days, on weekdays. This course is designed for new or novice operators and covers the basics in excavator operation and maintenance, with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
360 Excavator training – short duration course (March 2019)
We are running a shortened CPCS tracked 360 excavator course (A59A) for semi -experienced operators. The course runs across 5 consecutive days with a CPCS technical test on the final day. Spaces are limited to 4 delegates (2 per machine). Please get in touch if you feel this route may be for you (01269 844155). Outline Through a combination of targeted training and experience, an individual with the 360 excavator will be able to: Roles and responsibilities • Describe the nature of the sector of industry and their role and responsibilities as a plant operator Preparing for work • Name and explain the purpose of principal components, the basic construction, controls and terminology • Conform with manufacturer’s requirements as per the operator’s manual, other types of information source and relevant regulations and legislation • Undertake all pre-use checks Travelling and manoeuvring • Configure and set for travel (site and highway – where applicable) • Travel over rough, undulating ground, substantial inclines and level surfaces • Manoeuvre in confined spaces Setting up for work • Configure and set for excavating duties • Explain actions required for hazards, underground and overhead services Working tasks • Excavate differing types of excavations in various types of ground • Place materials into transporting vehicles and hoppers • Grade, spread and level ground and materials • Attach and remove buckets • Lift, move and place a variety of slung loads (Endorsement C) • Travel with slung loads (Endorsement C) Shutting down • Carry out shut down and securing procedures • Explain the loading and unloading procedures for machine...
ACOP is an award-winning company offering a one-stop solution for training and plant hire for the construction industry.
Reviews by ACOP trainees
Carl Andrews
2019-09-14T09:11:59+0000
Just want to say nice one to all the staff at acop completed my A59 course this week and it's a very relaxed professional training centre where all the guys taking the courses have plenty of experience and puts your mind at ease. I would recommend this centre to anyone who is looking to do ticketsread more
Victor Barrie Rees
2019-09-09T11:31:24+0000
Very professional, great staff make you feel at ease, good set up.