Here are the theory test questions for A26 Mobile Elevating Work Platform - Boom.
During the theory test you'll be asked a maximum of 40 questions.
Please note that your paper will include all the questions we have marked here with an asterisk *. In addition you will have a random selection of the other questions that are not marked here with an asterisk.
These questions will appear on every A26 paper
The operator has been asked to drive a self-propelled MEWP onto a transporter/ trailer.
a) Who is responsible for the loading operations and
b) state FOUR actions to be considered by the operator before loading commences. (5 marks)*
Before taking passengers up in a MEWP, what should be ensured about the individual or individuals? (2 marks)*
If setting up to lift in a pedestrianised area, state TWO factors that need to be taken into account. (2 marks)*
If raising the platform up to a ceiling of a structure, why must extra care be taken when nearing the ceiling? (2 marks)*
a) Why should the working height or reach of the task need to be accurately known when selecting a MEWP and
b) give TWO possible effects if the figure is inaccurate. (3 marks)*
What is meant by a bi-fuel MEWP? (1 marks)*
How do stabilisers increase the potential stability of a MEWP boom? (2 marks)*
Apart from ground conditions, list FIVE checks that must be taken into account when siting the MEWP. (5 marks)*
What are the THREE actions that a MEWP operator undertakes during pre-use inspections? (3 marks)*
If using a MEWP in an area where there are moving vehicles, state THREE precautions to be taken. (6 marks)*
a) Why must all travel and platform controls be clearly marked as to function and direction or mode and
b) what consequences could occur if controls were not clearly marked? (4 marks)*
What is the difference between:
a) a work-restraint system and
b) a fall arrest system? (4 marks)*
An operator has to drive a vehicle-mounted MEWP along a stretch of the public highway, for which the road traffic act applies. List SIX requirements that must be followed. (6 marks)*
When siting the MEWP for work, what checks must be made to the ground type? (2 marks)*
What THREE types of information may be found on the operating envelope chart of a MEWP boom? (3 marks)*
A random selection of these questions will appear on each A26 paper
When or why would foam-filled tyres be specified for platform operations? (1 marks)
Why should a diesel MEWP be re-fuelled at the end of the day? (1 marks)
Give TWO reasons why it is important that a MEWP is not leaning sideways before attempting to raise the platform. (2 marks)
When can a MEWP work (i.e. raise the platform) on sloping ground? (1 marks)
As a machine for the lifting of persons, the MEWP must be thoroughly examined.
a) What is the purpose of the examination and
b) who should carry out the examination? (2 marks)
If travelling near an open trench which has a depth of 2 metres, what is the minimum distance to maintain? (1 marks)
When working in a confined area or space with a diesel-powered machine, name THREE dangers that can be present? (3 marks)
When checking fluid levels, why must gloves be worn? (1 marks)
What is the purpose of the counterweight of the machine? (1 marks)
Give THREE reasons that may cause the machine to tip forwards. (3 marks)
If setting up to work near a steep slope, apart from ground support:
a) what could be a danger and
b) what actions should be taken? (3 marks)
The Safe Working Load (SWL) means exactly what? (2 marks)
What determines the type of harness that can be worn when operating a MEWP boom? (2 marks)
a) What determines the minimum distances that any part of plant and machinery has to be kept from over head electricity lines and
b) explain why a distance should be kept. (4 marks)
How can high wind speeds affect MEWP operations? (3 marks)
Give FOUR reasons that may cause the MEWP to tip over sideways. (4 marks)
On vehicle-mounted MEWPs, what main precaution should be taken before travelling on the public highway? (2 marks)
What would happen if the steering axle is to the rear of the direction for travel? (1 marks)
When setting up for work, what should be in place should machine failure happen? (2 marks)
Before leaving the cab or platform for a rest break, after parking and switching off the machine, what final action must be carried out? (2 marks)
On IC engines, during work, the engine starts to overheat. Explain the danger if someone tries to remove the radiator or expansion tank cap. (2 marks)
The operator has to use a new type of MEWP that they are unfamiliar with. What do Regulations (i.e. PUWER 98) and other guidance require the operator to have? (3 marks)
Name TWO factors that determine the weight of a load. (2 marks)
What must you take into account when calculating the safe working load of the platform of a MEWP? (4 marks)
If setting up to work near a bank, what is the recommended distance between the stabilisers or wheels and the top of the bank? (4 marks)
If required to wear a safety harness or belt:
a) where must it be attached to and
b) where should the harness not be attached to? (2 marks)
When parking the machine at the end of the shift, name THREE places where the MEWP should NOT be parked. (3 marks)
Name FOUR ways that wet weather affects MEWP operations. (4 marks)
a) What is meant by the working range of the MEWP and
b) who determines it? (2 marks)
State the purpose of the check valve(s) located on the boom cylinder ram (or rams), circuit. (1 marks)
Before climbing or descending a slope, what FOUR factors should be checked? (4 marks)
End of questions for A26 Mobile Elevating Work Platform - Boom
