Here are the theory test questions for A23 Skid Steer Loader.
During the theory test you'll be asked a maximum of 40 questions.
Please note that your paper will include all the questions we have marked here with an asterisk *. In addition you will have a random selection of the other questions that are not marked here with an asterisk.
These questions will appear on every A23 paper
On non self-levelling buckets, what problem can occur if a fully loaded bucket is raised to full height? (2 marks)*
The operator has been asked to drive the machine onto a transporter/trailer.
a) Who is responsible for the loading operations and
b) state FOUR actions to be considered by the operator before loading commences? (5 marks)*
Name THREE attachments that are available for a skid steer. (3 marks)*
How are skid steer bucket sizes calculated? (1 marks)*
Why should a skid steer not be travelled if there is no attachment/bucket fitted to the loader arms? (2 marks)*
Skid steers may be equipped with a clamshell bucket. Name TWO functions of this type of bucket. (2 marks)*
Explain ALL visual checks that must be carried out on all types of quick-hitch bucket attaching systems before use. (4 marks)*
The operator is asked to tip material into a trench. State FIVE different requirements that must be considered or implemented before tipping commences. (5 marks)*
Describe briefly how a (wheeled) skid steer ‘steers’ or changes direction. (1 marks)*
If setting up to work in a pedestrianised area, state THREE factors that need to be taken into account. (3 marks)*
When constructing a ramp to load a small crusher, name THREE considerations to take into account. (3 marks)*
What is regarded as the most productive position for the vehicle to be in when being loaded by a skid steer working from a stockpile? (1 marks)*
How can a skid steer turn around within its own area? (3 marks)*
State TWO requirements of using a stop block or earth bank (berm) at a trench discharging point. (4 marks)*
Why should different materials be segregated during extracting? (1 marks)*
A random selection of these questions will appear on each A23 paper
a) What is the minimum distance allowed near open trenches when travelling with a loaded skid steer and
b) explain why? (1 marks)
On pneumatic tyre-equipped machines, what is a possible consequence of using a tyre with a deep cut in the sidewall? (1 marks)
When parking the machine at the end of the shift, name THREE places where the machine should NOT be parked. (3 marks)
When working in a confined area or space, name THREE hazards that can occur. (3 marks)
If access or egress to/from the cab has to be via the front of the machine, state two precautions to be observed before exiting the machine. (2 marks)
Whenever possible, who should decide the positioning of the vehicle to be loaded? (1 marks)
If the operator has loaded the machine onto a transporter/trailer on behalf of a driver, what checks must be carried out before they leave the cab? (2 marks)
Why should a skid steer be re-fuelled at the end of the day? (1 marks)
Give FOUR reasons that may cause the skid steer to tip over sideways. (4 marks)
If a load has to be tipped on a slope, what may happen if the load is tipped downhill and why? (2 marks)
If checking the oil level using a dipstick, why must gloves be worn? (1 marks)
Why must the seat belt be worn, even within the confines of the cab? (2 marks)
a) Name THREE purposes of the treads on tyres and b) what can happen to a skid steer if the treads are severely worn? (4 marks)
Name THREE conditions that mirrors on the machine must be in. (3 marks)
On a semi-automatic quick-hitch bucket attaching system:
a) what is the purpose of the safety pin and
b) what checks MUST be made to the pin before use? (3 marks)
When working in a confined area or space:
a) what danger can be present with regards to the rear of the machine,
b) what is the recommended minimum distance and
c) what measures must be implemented if the gap is less? (3 marks)
If the operator has to top-up the hydraulic oil, state TWO precautions to ensure cleanliness of the system. (2 marks)
Before leaving the cab for a rest break, after parking and switching off the machine, what final action must be carried out? (2 marks)
In what situation does a hard hat NOT need to be worn when operating a skid steer? (2 marks)
a) What determines the minimum distances that any part of plant and machinery has to be kept from over head electricity lines and
b) explain why a distance should be kept. (4 marks)
What is the purpose of the counterweight of the machine? (1 marks)
Describe ONE physical method of checking that the attachment is fully secured to the coupler prior to work. (4 marks)
What is the purpose of a roll or ROPS frame? (2 marks)
When travelling on wet clay or rock, what effect does this have on the skid steer? (2 marks)
What problems and hazards can soft ground cause to a loaded skid steer? (2 marks)
Before manually changing any bucket:
a) Where should the bucket be positioned (in relation to the ground) before removing the final pin and
b) explain why? (2 marks)
Give TWO reasons why the skid steer operator should have an understanding of the type of material being loaded. (2 marks)
The operator has to fit and use a new attachment using a quick-hitch coupler that they are unfamiliar with. What do Regulations (i.e. PUWER 98) and other guidance require the operator to have? (3 marks)
Who should determine the maximum load that should be placed into a load-transporting vehicle? (2 marks)
During work, the engine starts to overheat.
Explain the danger if someone tries to remove the radiator or expansion tank cap. (2 marks)
End of questions for A23 Skid Steer Loader
