Here are the theory test questions for A14 Rough Terrain Masted Forklift.
During the theory test you'll be asked a maximum of 40 questions.
Please note that your paper will include all the questions we have marked here with an asterisk *. In addition you will have a random selection of the other questions that are not marked here with an asterisk.
These questions will appear on every A14 paper
Before loading an uncoupled trailer, what THREE precautions must be taken? (3 marks)*
What are the THREE actions or stages that a forklift operator undertakes during pre-use inspections? (3 marks)*
What should be known about the loading out tower before placing loads? (2 marks)*
a) What is meant by the load centre and
b) why must it be known for each lift? (2 marks)*
Name SIX possible proximity hazards that may be encountered on site when travelling with a load. (6 marks)*
Explain THREE checks that should be made to the mast lift chains. (3 marks)*
Compared to a duplex (double) mast:
a) why would a triplex mast be fitted/used and
b) what disadvantage does the mast have over the duplex? (2 marks)*
State FOUR checks that should be made to the forks. (4 marks)*
Name TWO factors that determine the weight of a load. (2 marks)*
The operator has been asked to drive the machine onto a transporter/trailer.
a) Who is responsible for the loading operations and
b) state FOUR actions to be considered by the operator before loading commences? (5 marks)*
If placing a variety of loads onto a rigid, flatbed transporter, where should the heaviest loads be placed? (2 marks)*
Name FOUR factors to consider and know before picking up a load. (4 marks)*
If setting up to lift and move loads in a pedestrianised area, state THREE factors that need to be taken into account. (3 marks)*
When placing onto or lifting a load from a loading out tower:
a) why must the forklift’s handbrake be on and the transmission in neutral and
b) what would be the consequences if this was not done? (4 marks)*
What are FOUR safety checks that should be made before loading or unloading a suitable vehicle? (4 marks)*
A random selection of these questions will appear on each A14 paper
Give FOUR reasons that may cause the forklift to tip over sideways. (4 marks)
During work, the engine starts to overheat.
Explain the danger if someone tries to remove the radiator or expansion tank cap. (2 marks)
Why must the seat belt be worn, even with the cab door closed? (2 marks)
Why should a forklift be re-fuelled at the end of the day? (1 marks)
Before manually changing any attachment:
a) where should the attachment be positioned (in relation to the ground) and
b) why? (2 marks)
If checking the oil level using a dipstick, why must gloves be worn? (1 marks)
How is it possible that forklifts can still tip over, even when travelling on gentle gradients, are not overloaded and not being driven at excessive speed? (3 marks)
a) Name THREE purposes of the treads on tyres and b) what can happen to a forklift if the treads are severely worn? (4 marks)
Which parts of the forklift is the load centre usually measured from? (1 marks)
As a lifting machine, the forklift must be thoroughly examined.
a) What is the purpose of the examination and
b) who would carry out the examination? (2 marks)
When parking the machine at the end of the shift, name THREE places where the machine should NOT be parked. (3 marks)
Name FOUR ways that wet weather can affect forklift operations. (4 marks)
a) What is the minimum distance allowed near open trenches when travelling with a forklift and
b) explain why? (2 marks)
Before leaving the cab for a rest break, after parking and switching off the machine, what final action must be carried out? (2 marks)
After placing a load, who is responsible for ensuring the load is safe? (1 marks)
In what situation does a hard hat NOT need to be worn when operating a forklift? (2 marks)
What is a possible consequence of using a tyre with a deep cut in the sidewall? (1 marks)
When working in a confined area or space, name THREE dangers that can be present. (3 marks)
What is the purpose of a roll or ROPS frame? (2 marks)
When working in a confined area or space:
a) what danger can be present with regards to the counterweight of the forklift,
b) when should measures be taken and
c) what measures should be implemented? (3 marks)
If the load centre of the load is longer (increased) than stipulated for the model of forklift, what effect does it have on the lifting capacity of the machine? (3 marks)
Give THREE reasons why it is important that a forklift is not leaning sideways before attempting to lift or place a load. (3 marks)
Before picking up a load, why should the forks be equally spaced or distanced on the carriage? (1 marks)
Before travelling with a physically large load, name FIVE factors that must be taken into account by the operator before moving. (5 marks)
What is the purpose of the counterweight of the machine? (1 marks)
Name THREE conditions that mirrors on the machine must be in. (3 marks)
a) What is meant by the lifting capacity of the forklift and
b) who determines it? (2 marks)
Forklift operations fall within the scope of the Lifting Operations and Lifting Equipment Regulations (LOLER) 1998. Name TWO requirements of the act with regards to lifting. (2 marks)
What THREE items must be printed on a forklift's rating plate? (3 marks)
a) What determines the minimum distances that any part of plant and machinery has to be kept from over head electricity lines and
b) explain why a distance should be kept. (4 marks)
The operator has to use a new type of forklift that they are unfamiliar with. What do Regulations (i.e. PUWER 98) and other guidance require the operator to have? (3 marks)
What problems and hazards can soft ground cause to a loaded forklift? (2 marks)
If the operator has loaded the machine onto a transporter/trailer on behalf of a driver, what checks must be carried out before they leave the cab? (2 marks)
Give FOUR reasons that may cause the machine to tip forwards. (4 marks)
A manufacturer must give recommendations on how to travel a forklift up and down inclines.
If this information is not known first hand, what is the general rule about travelling up and down slopes? (2 marks)
State the possible effect of lifting a load whilst facing downhill on a slope. (1 marks)
End of questions for A14 Rough Terrain Masted Forklift
