BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ACOP - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://acopgroup.com
X-WR-CALDESC:Events for ACOP
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20240331T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20241027T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250106T080000
DTEND;TZID=Europe/London:20250109T170000
DTSTAMP:20260417T224040
CREATED:20150325T233111Z
LAST-MODIFIED:20241004T130439Z
UID:5904-1736150400-1736442000@acopgroup.com
SUMMARY:Slinger/ Signaller training (January 2025) CPCS
DESCRIPTION:A 4 day CPCS Slinger/ signaller – all duties (A40A) course. Maximum of 3 delegates. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a slinger/signaller. This qualification covers slinger/signaller – all duties. \nThrough a combination of targeted training and experience\, a slinger/signaller will be able to: \nSlinger/ signaller course content\n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a slinger/signaller\n\nPreparing for work\n\nName and explain the purpose of differing types of lifting equipment and lifting accessories\, basic construction\, uses and applications\, characteristics and terminology\nConform with manufacturer’s requirements as per technical data\, other types of information source and relevant regulations and legislation\nInterpret and extract information on all relevant documentation\nUndertake all pre-use checks on non-specialist lifting accessories (relevant to the endorsement) and identify non-serviceable items\nIdentify specialist lifting accessories relevant to the endorsement\nExplain when additional skills and knowledge for lifting operations may be required\nExplain procedures for placing non-serviceable items out-of-service\n\nSetting up for work\n\nConfirm methods of communication with the machine operator\nIdentify centres of gravity and establish weights of loads\nPrepare and ready the area of operation and maintain exclusion zones\nChoose the relevant lifting accessory for a given load\nExplain actions required for hazards including underground and overhead services\n\nSlinger/ signaller working tasks\n\nSecure and detach various types of load to the requisite lifting point using the relevant lifting accessory and procedures\nEnsure load balance\, security and integrity\nGuide and control the movement of loads to different types of location\nExplain the importance and locations of positions of safety for a slinger and other personnel\nAccurately place loads\nUse and comply with a range of communication procedures\nProvide directions where the machine operator cannot observe the full path of the load\nMaintain safe working situations\n\nWorking tasks (pick and carry duties)\n\nAssess and confirm that the area for machine movement is suitable for manoeuvring activities and contains suitable locations to undertake marshalling duties (endorsements A\, D and E)\nControl loads during pick-and-carry duties (endorsements A\, D and E)\n\nCompleting work\n\nCarry out out-of-service and securing procedures\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/slinger-signaller-training-january-2025-cpcs-2/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/04/BOWG8340.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250106T080000
DTEND;TZID=Europe/London:20250110T170000
DTSTAMP:20260417T224040
CREATED:20150318T160335Z
LAST-MODIFIED:20241113T161541Z
UID:5954-1736150400-1736528400@acopgroup.com
SUMMARY:ROTO/ 360 Telescopic handler training (January 2025) CPCS
DESCRIPTION:A 5 day CPCS telescopic handler course. \nSpaces are limited to 2 delegates per course. \nThis course covers the basics in 360 telehandler operation and maintenance\, with a CPCS technical test (A77) on the final day. \nIn addition to the 360 telehandler category\, successful learners will also gain the A17C (telescopic handler) and A17E (suspended loads) endorsements. \nThis is shortened course is aimed at experienced telehandler ops. Please contact the office for profiling prior to booking. \n360 Telescopic Handler training course content\nOutcomes\nThrough a combination of targeted training and experience\, an individual with the 360 telescopic handler will be able to: \n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a plant operator\n\nPreparing for work\n\nName and explain the purpose of principal components\, the basic construction\, controls and terminology\nConform with manufacturer’s requirements as per the operator’s handbook\, other types of information source and relevant regulations and legislation\nUndertake all pre-use checks\nExplain the need and function of appropriate documentation\n\nTravelling and manoeuvring\n\nConfigure and ready for travel (site and highway)\nTravel over level surfaces with and without loads and\, where applicable\, on rough\, undulating ground and inclines. (excluding suspended loads)\nManoeuvre in confined spaces with and without loads (including suspended loads for endorsement E)\nFollow given signals and instructions when travelling and manoeuvring with and without loads\n\nSetting the telehandler up for work\n\nConfigure and set for all lifting\, loading and transferring duties\nAttach and remove attachments\, including forks.\nAttach and remove hoist-rope attachments for the movement of suspended loads\nExplain actions required for proximity hazards Inc. underground and overhead services\nExplain the basic principles of the slinging of loads\, types of lifting accessories that can be used and the correct and incorrect methods for attaching suspended loads to the machine\nExplain the requirements for ensuring adequate ground support and stability\nExplain the causes of instability during blocked\, free-on-wheel and pick-and carry duties\nLift and place various suspended and fork-mounted loads from a variety of locations including a vehicle\nLift and place suspended and fork-mounted loads under blocked\, free-on- wheels and pick-and-carry duties\nLift\, transfer and place fixed-hook suspended loads up to maximum extension\, at full working height and using the full slewing capability of the machine\nLift\, transfer and place hoist-rope suspended loads up to maximum extension\, at full of working height and using the full slewing capability of the machine (Blocked duties)\n\nWorking tasks\n\nLift\, transfer and place fork-mounted loads up to maximum extension\, at full working height and using the full slewing capability of the machine (Free-on- wheels)\nMinimise the swinging of suspended loads during travel\nExplain how stability is affected by travelling with a raised/extended boom and/or rotated upper structure with suspended loads and fork-mounted loads (both regular and irregular)\nExplain visibility issues and restrictions with suspended and fork-mounted loads\nPlace suspended loads out of sight of the operator\nMaintain safe working situations\n\nCompleting work\n\n\n\n\nMaintain safe and tidy working areas\n\nShutting down\n\n\n\n\nCarry out shut down and securing procedures\n Explain the loading and unloading procedures for machine transporting\n\n\n\n\n\n\n\n\n\n\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/roto-360-telescopic-handler-training-january-2025-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2023/06/IMG_1351-scaled.jpeg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250113T080000
DTEND;TZID=Europe/London:20250117T170000
DTSTAMP:20260417T224040
CREATED:20151104T165021Z
LAST-MODIFIED:20241004T130204Z
UID:5900-1736755200-1737133200@acopgroup.com
SUMMARY:Loading Shovel Training (January 2025) CPCS
DESCRIPTION:We are running a 5 day CPCS loading shovel course (A21). Maximum of 2 learners. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a loading shovel operator. \nThrough a combination of targeted training and experience\, an individual with the wheeled loading shovel will be able to: \nLoading shovel training course content\n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a plant operator\n\nPreparing for work\n\nName and explain the purpose of principal components\, the basic construction\, controls and terminology\nConform with manufacturer’s requirements as per the operator’s handbook\, other types of information source and relevant regulations and legislation\nUndertake all pre-use checks\n\nTravelling and manoeuvring the loading shovel\n\nConfigure and set for site and highway travel\nTravel over rough\, undulating ground\, substantial inclines and level surfaces; laden and unladen\nManoeuvre in confined spaces\n\nSetting up for work\n\nConfigure and set for extraction and loading duties\nExplain actions required for hazards\, underground and overhead services\n\nWorking tasks on the loading shovel\n\nExtract differing types of materials from stockpiles and other sources\nForm stockpiles of segregated materials and construct (temporary) ramps\nSort and place materials into transporting vehicles and hoppers\nSpread and level ground and materials\n\nShutting down\n\nCarry out shut down and securing procedures\nExplain the loading and unloading procedures for machine transporting\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/loading-shovel-training-january-2025-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/10/IMG_2298.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250113T080000
DTEND;TZID=Europe/London:20250121T170000
DTSTAMP:20260417T224040
CREATED:20150318T160709Z
LAST-MODIFIED:20241004T130032Z
UID:5895-1736755200-1737478800@acopgroup.com
SUMMARY:Appointed person (lift planner) training (January 2025) CPCS
DESCRIPTION:We are running 6 day CPCS Appointed person (A61) course\, \nThis involves 5 consecutive days training from Monday to Friday\, with CPCS technical test on the following Monday. \nThis course is designed for individuals appointed to plan and manage lifting operations on site. \nIf the A40 slinger/signaller category is already held under CPCS\, then the Crane Supervisor endorsement is also issued upon successful completion of the AP course. \nSpaces are limited to 6 delegates per course. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of an Appointed Person/ lift planner. \nAppointed Person course content\nThrough a combination of targeted training and experience\, an appointed person will be able to: \n\nLegislative and regulative\n\nState basic requirements of legislation\, regulations\, codes of practice\, guidance and good practice documentation that relate to all types of lifting duties\nExplain the duties and responsibilities of those involved in a lifting operation including: an appointed person\, a lifting operations supervisor\, a lift co-ordinator\, a machine operator\, a slinger\, a signaller\, a lifting equipment installer/erector and maintenance personnel\nIdentify the requirements for basic\, standard and complex lifts\nDescribe the lighting requirements for in and out of service conditions for lifting equipment\nState requirements to be followed when planning the lifting of persons\n\nLifting equipment\n\nIdentify different types of lifting equipment\, and explain capabilities and limitations of each for given lifting operations\nOutline pre-use checks requirements for lifting equipment and accessories\nExplain maintenance inspection\, thorough examination and testing requirements for lifting equipment and accessories\nDescribe setting up\, erection\, levelling and dismantling requirements for different types of lifting equipment and lifting operations\nCalculate lifting equipment point loadings/outrigger loadings\, spreader mat types and sizes from given information\nIdentify ground pressure and support loadings from given information\nExplain the function and use of\, and use information provided by\, RCIs and safety devices applicable to a range of lifting equipment\nSelect the correct lifting equipment for specified lifts\nExtract information from manufacturer’s technical specifications\, duties charts\, range diagrams and other information sources\nSpecify lifting equipment configurations for specific types of lifting operations\nIdentify attachments and ancillaries to lifting equipment.\nDescribe out of service procedures for lifting equipment including locations\, configurations\, and markings\n\nLifting accessories\n\nList different types of lifting accessories and explain typical applications\nIdentify and explain relevant information relating to different types of lifting accessories e.g. markings\, certificates and thorough examination reports\nCalculate sling capacities\, lengths and angles\nExplain slinging techniques for given loads including balanced\, unbalanced and loose\nSpecify appropriate lifting accessories for given types of loads\nIdentify weights and centres of gravity for different types of loads\n\nCommunication\n\nDescribe and specify different types of communication methods for lifting purposes\nExplain factors that determine types of communication methods\, the limitations of each and the effects of poor communication\nState the need to complete a reflective report following a typical lifting operation\n\nPlanning\n\nIdentify potential proximity and underground hazards from given plans and drawings\nIdentify and plan an area\, with exclusion zones for different\, given lifting operations incorporating safe access/egress routes for before\, during and after the lift\nState requirements that allow safe site access and egress for typical lifting equipment\nSpecify the security requirements for specific lifting operations\nConstruct a safe system of work by producing risk assessments\, method statements and lift plans\, including drawings\, using given information\nExplain additional requirements for pick and carry duties\nCommunicate lift plan information to others involved in a lifting operation i.e. lifting supervisor\, machine operator\, slinger etc.\nSpecify positioning of lifting equipment\, loads in relation to fixed objects and other limiting factors\nExplain the definition\, requirements and factors for temporary works management and the effects on typical lifting operations\nIdentify how the effects of fatigue on the lifting team can affect a lifting operation and how it should be managed\nEvaluate and explain how the weather\, other environmental factors\, and the surrounding area external to the lift zone – can affect the planned lifting operation\nExplain how wind loadings and sail-affect areas are calculated\nDescribe notification\, liaising and reporting procedures to statutory\, authority\, and utility bodies when affected by the lifting operation\, i.e. works\, railways\, highways\, airfields\, etc.\nExplain the requirements to be followed when lifting loads from height\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/appointed-person-lift-planner-training-january-2025-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/07/f14e3710-30f5-4ed5-9c1f-420d55113a1a.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250120T080000
DTEND;TZID=Europe/London:20250123T170000
DTSTAMP:20260417T224040
CREATED:20150325T233111Z
LAST-MODIFIED:20241004T130401Z
UID:5902-1737360000-1737651600@acopgroup.com
SUMMARY:Slinger/ Signaller training (January 2025) CPCS
DESCRIPTION:A 4 day CPCS Slinger/ signaller – all duties (A40A) course. Maximum of 3 delegates. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a slinger/signaller. This qualification covers slinger/signaller – all duties. \nThrough a combination of targeted training and experience\, a slinger/signaller will be able to: \nSlinger/ signaller course content\n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a slinger/signaller\n\nPreparing for work\n\nName and explain the purpose of differing types of lifting equipment and lifting accessories\, basic construction\, uses and applications\, characteristics and terminology\nConform with manufacturer’s requirements as per technical data\, other types of information source and relevant regulations and legislation\nInterpret and extract information on all relevant documentation\nUndertake all pre-use checks on non-specialist lifting accessories (relevant to the endorsement) and identify non-serviceable items\nIdentify specialist lifting accessories relevant to the endorsement\nExplain when additional skills and knowledge for lifting operations may be required\nExplain procedures for placing non-serviceable items out-of-service\n\nSetting up for work\n\nConfirm methods of communication with the machine operator\nIdentify centres of gravity and establish weights of loads\nPrepare and ready the area of operation and maintain exclusion zones\nChoose the relevant lifting accessory for a given load\nExplain actions required for hazards including underground and overhead services\n\nSlinger/ signaller working tasks\n\nSecure and detach various types of load to the requisite lifting point using the relevant lifting accessory and procedures\nEnsure load balance\, security and integrity\nGuide and control the movement of loads to different types of location\nExplain the importance and locations of positions of safety for a slinger and other personnel\nAccurately place loads\nUse and comply with a range of communication procedures\nProvide directions where the machine operator cannot observe the full path of the load\nMaintain safe working situations\n\nWorking tasks (pick and carry duties)\n\nAssess and confirm that the area for machine movement is suitable for manoeuvring activities and contains suitable locations to undertake marshalling duties (endorsements A\, D and E)\nControl loads during pick-and-carry duties (endorsements A\, D and E)\n\nCompleting work\n\nCarry out out-of-service and securing procedures\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/slinger-signaller-training-january-2025-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/04/BOWG8340.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20250127T080000
DTEND;TZID=Europe/London:20250210T170000
DTSTAMP:20260417T224040
CREATED:20150318T152506Z
LAST-MODIFIED:20241004T125900Z
UID:5896-1737964800-1739206800@acopgroup.com
SUMMARY:Tracked 360 Excavator training - novice course (January/ February 2025) CPCS
DESCRIPTION:An eleven day CPCS tracked 360 excavator course (A59A). \nSpaces are limited to 2 delegates. \nThis is a full foundation course designed for novice operators. \nThe course runs across 11 consecutive week days with a CPCS technical test on the final (11th) day. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the excavator operator. This qualification covers 360 excavators. \nThrough a combination of targeted training and experience\, an individual with the 360 excavator will be able to accomplish the following. \n360 Excavator training course content\n\nRoles and responsibilities\n• Describe the nature of the sector of industry and their role and responsibilities as a plant operator\nPreparing for work\n• Name and explain the purpose of principal components\, the basic construction\, controls and terminology\n• Conform with manufacturer’s requirements as per the operator’s manual\, other types of information source and relevant regulations and legislation\n• Undertake all pre-use checks \nTravelling and manoeuvring your 360 excavator\n• Configure and set for travel (site and highway – where applicable)\n• Travel over rough\, undulating ground\, substantial inclines and level surfaces\n• Manoeuvre in confined spaces \nSetting up for work with the 360 excavator\n\n• Configure and set for excavating duties\n• Explain actions required for hazards\, underground and overhead services \nWorking tasks on the 360 excavator\n• Excavate differing types of excavations in various types of ground\n• Place materials into transporting vehicles and hoppers\n• Grade\, spread and level ground and materials\n• Attach and remove buckets\n• Lift\, move and place a variety of slung loads (Endorsement C)\n• Travel with slung loads (Endorsement C) \nShutting down\n\n• Carry out shut down and securing procedures\n• Explain the loading and unloading procedures for machine transporting \n  \nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/tracked-360-excavator-training-novice-course-january-february-2025-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/11/jcb140x-2.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
END:VCALENDAR