BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//ACOP - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://acopgroup.com
X-WR-CALDESC:Events for ACOP
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260427T080000
DTEND;TZID=Europe/London:20260501T170000
DTSTAMP:20260417T062844
CREATED:20150318T152506Z
LAST-MODIFIED:20260319T085905Z
UID:6371-1777276800-1777654800@acopgroup.com
SUMMARY:Tracked 360 Excavator training - short duration course (April 2026) CPCS
DESCRIPTION:A 5 day CPCS tracked 360 excavator course (A59A). \nSpaces are limited to 2 delegates. \nPrior 360 operating experience is essential for this short-duration course. \nThe aim of this shortened course is to develop on existing skills prior to completing the CPCS A59 technical test.This qualification covers tracked 360 excavators. \nThrough a combination of targeted training and experience\, an individual with the 360 excavator will be able to accomplish the following. \n360 Excavator training course content\n\nRoles and responsibilities\n• Describe the nature of the sector of industry and their role and responsibilities as a plant operator\nPreparing for work\n• Name and explain the purpose of principal components\, the basic construction\, controls and terminology\n• Conform with manufacturer’s requirements as per the operator’s manual\, other types of information source and relevant regulations and legislation\n• Undertake all pre-use checks \nTravelling and manoeuvring your 360 excavator\n• Configure and set for travel (site and highway – where applicable)\n• Travel over rough\, undulating ground\, substantial inclines and level surfaces\n• Manoeuvre in confined spaces \nSetting up for work with the 360 excavator\n\n• Configure and set for excavating duties\n• Explain actions required for hazards\, underground and overhead services \nWorking tasks on the 360 excavator\n• Excavate differing types of excavations in various types of ground\n• Place materials into transporting vehicles and hoppers\n• Grade\, spread and level ground and materials\n• Attach and remove buckets\n• Lift\, move and place a variety of slung loads (Endorsement C)\n• Travel with slung loads (Endorsement C) \nShutting down\n\n• Carry out shut down and securing procedures\n• Explain the loading and unloading procedures for machine transporting \n  \nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/tracked-360-excavator-training-short-duration-course-april-2026-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/11/jcb140x-2.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260511T080000
DTEND;TZID=Europe/London:20260515T170000
DTSTAMP:20260417T062844
CREATED:20151104T165021Z
LAST-MODIFIED:20260223T121922Z
UID:6360-1778486400-1778864400@acopgroup.com
SUMMARY:Loading Shovel Training (May 2026) CPCS
DESCRIPTION:We are running a 5 day CPCS loading shovel course (A21). Maximum of 2 learners. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a loading shovel operator. \nThrough a combination of targeted training and experience\, an individual with the wheeled loading shovel will be able to: \nLoading shovel training course content\n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a plant operator\n\nPreparing for work\n\nName and explain the purpose of principal components\, the basic construction\, controls and terminology\nConform with manufacturer’s requirements as per the operator’s handbook\, other types of information source and relevant regulations and legislation\nUndertake all pre-use checks\n\nTravelling and manoeuvring the loading shovel\n\nConfigure and set for site and highway travel\nTravel over rough\, undulating ground\, substantial inclines and level surfaces; laden and unladen\nManoeuvre in confined spaces\n\nSetting up for work\n\nConfigure and set for extraction and loading duties\nExplain actions required for hazards\, underground and overhead services\n\nWorking tasks on the loading shovel\n\nExtract differing types of materials from stockpiles and other sources\nForm stockpiles of segregated materials and construct (temporary) ramps\nSort and place materials into transporting vehicles and hoppers\nSpread and level ground and materials\n\nShutting down\n\nCarry out shut down and securing procedures\nExplain the loading and unloading procedures for machine transporting\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/loading-shovel-training-may-2026-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/10/IMG_2298.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260518T080000
DTEND;TZID=Europe/London:20260522T170000
DTSTAMP:20260417T062844
CREATED:20150325T233111Z
LAST-MODIFIED:20260223T122009Z
UID:6362-1779091200-1779469200@acopgroup.com
SUMMARY:Slinger/ Signaller training (May 2026) CPCS
DESCRIPTION:A 5 day CPCS Slinger/ signaller – all duties (A40A) course. Maximum of 4 delegates. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a slinger/signaller. This qualification covers slinger/signaller – all duties. \nThrough a combination of targeted training and experience\, a slinger/signaller will be able to: \nSlinger/ signaller course content\n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a slinger/signaller\n\nPreparing for work\n\nName and explain the purpose of differing types of lifting equipment and lifting accessories\, basic construction\, uses and applications\, characteristics and terminology\nConform with manufacturer’s requirements as per technical data\, other types of information source and relevant regulations and legislation\nInterpret and extract information on all relevant documentation\nUndertake all pre-use checks on non-specialist lifting accessories (relevant to the endorsement) and identify non-serviceable items\nIdentify specialist lifting accessories relevant to the endorsement\nExplain when additional skills and knowledge for lifting operations may be required\nExplain procedures for placing non-serviceable items out-of-service\n\nSetting up for work\n\nConfirm methods of communication with the machine operator\nIdentify centres of gravity and establish weights of loads\nPrepare and ready the area of operation and maintain exclusion zones\nChoose the relevant lifting accessory for a given load\nExplain actions required for hazards including underground and overhead services\n\nSlinger/ signaller working tasks\n\nSecure and detach various types of load to the requisite lifting point using the relevant lifting accessory and procedures\nEnsure load balance\, security and integrity\nGuide and control the movement of loads to different types of location\nExplain the importance and locations of positions of safety for a slinger and other personnel\nAccurately place loads\nUse and comply with a range of communication procedures\nProvide directions where the machine operator cannot observe the full path of the load\nMaintain safe working situations\n\nWorking tasks (pick and carry duties)\n\nAssess and confirm that the area for machine movement is suitable for manoeuvring activities and contains suitable locations to undertake marshalling duties (endorsements A\, D and E)\nControl loads during pick-and-carry duties (endorsements A\, D and E)\n\nCompleting work\n\nCarry out out-of-service and securing procedures\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/slinger-signaller-training-may-2026-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/04/BOWG8340.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260525T080000
DTEND;TZID=Europe/London:20260529T170000
DTSTAMP:20260417T062844
CREATED:20150325T233111Z
LAST-MODIFIED:20260410T150501Z
UID:6398-1779696000-1780074000@acopgroup.com
SUMMARY:Slinger/ Signaller training (May 2026) CPCS
DESCRIPTION:A 5 day CPCS Slinger/ signaller – all duties (A40A) course. Maximum of 4 delegates. \nThe aim of this course is to provide candidates with practical and theoretical knowledge to help undertake the role of a slinger/signaller. This qualification covers slinger/signaller – all duties. \nThrough a combination of targeted training and experience\, a slinger/signaller will be able to: \nSlinger/ signaller course content\n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a slinger/signaller\n\nPreparing for work\n\nName and explain the purpose of differing types of lifting equipment and lifting accessories\, basic construction\, uses and applications\, characteristics and terminology\nConform with manufacturer’s requirements as per technical data\, other types of information source and relevant regulations and legislation\nInterpret and extract information on all relevant documentation\nUndertake all pre-use checks on non-specialist lifting accessories (relevant to the endorsement) and identify non-serviceable items\nIdentify specialist lifting accessories relevant to the endorsement\nExplain when additional skills and knowledge for lifting operations may be required\nExplain procedures for placing non-serviceable items out-of-service\n\nSetting up for work\n\nConfirm methods of communication with the machine operator\nIdentify centres of gravity and establish weights of loads\nPrepare and ready the area of operation and maintain exclusion zones\nChoose the relevant lifting accessory for a given load\nExplain actions required for hazards including underground and overhead services\n\nSlinger/ signaller working tasks\n\nSecure and detach various types of load to the requisite lifting point using the relevant lifting accessory and procedures\nEnsure load balance\, security and integrity\nGuide and control the movement of loads to different types of location\nExplain the importance and locations of positions of safety for a slinger and other personnel\nAccurately place loads\nUse and comply with a range of communication procedures\nProvide directions where the machine operator cannot observe the full path of the load\nMaintain safe working situations\n\nWorking tasks (pick and carry duties)\n\nAssess and confirm that the area for machine movement is suitable for manoeuvring activities and contains suitable locations to undertake marshalling duties (endorsements A\, D and E)\nControl loads during pick-and-carry duties (endorsements A\, D and E)\n\nCompleting work\n\nCarry out out-of-service and securing procedures\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/slinger-signaller-training-may-2026-cpcs-2/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/04/BOWG8340.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20260601T080000
DTEND;TZID=Europe/London:20260605T170000
DTSTAMP:20260417T062844
CREATED:20150318T160335Z
LAST-MODIFIED:20260319T084443Z
UID:6368-1780300800-1780678800@acopgroup.com
SUMMARY:Telescopic handler training (June 2026) CPCS
DESCRIPTION:A 5 day CPCS telescopic handler course. \nSpaces are limited to 3 delegates per course. \nThis course covers the basics in telehandler operation and maintenance\, with a CPCS technical test (A17C) on the final day. \nThere is an option to add an additional day’s training to include the (A17e) ‘suspended loads – non rough terrain’ CPCS endorsement. \nTelescopic Handler training course content\nOutcomes\nThrough a combination of targeted training and experience\, an individual with the telescopic handler will be able to: \n\nRoles and responsibilities\n\nDescribe the nature of the sector of industry and their role and responsibilities as a plant operator\n\nPreparing for work\n\nName and explain the purpose of principal components\, the basic construction\, controls and terminology\nConform with manufacturer’s requirements as per the operator’s handbook\, other types of information source and relevant regulations and legislation\nUndertake all pre-use checks\nExplain the need and function of appropriate documentation\n\nTravelling and manoeuvring\n\nConfigure and ready for travel (site and highway)\nTravel over level surfaces with and without loads and\, where applicable\, on rough\, undulating ground and inclines. (excluding suspended loads)\nManoeuvre in confined spaces with and without loads (including suspended loads for endorsement E)\nFollow given signals and instructions when travelling and manoeuvring with and without loads (including suspended loads for endorsement E)\n\nSetting the telehandler up for work\n\nConfigure and set for all lifting\, loading and transferring duties\nAttach and remove attachments\, including forks\, for the movement of units loads\nAttach and remove attachments and accessories for the movement of suspended loads\nExplain actions required for proximity hazards Inc. underground and overhead services\nFollow given signals and instructions during work activities\n\nWorking tasks (Fork use)\n\nLift and remove various loads up to full extension and working height of the tele-handler\nTransfer and place loads accurately at given locations\nPlace and remove loads from a vehicle\nMaintain safe working situations\n\n\nFor your reference you can download the relevant questions for the theory test. \nACOP Group is accredited by both CPCS and NPORS.
URL:https://acopgroup.com/course/telescopic-handler-training-june-2026-cpcs/
LOCATION:ACOP Group Limited\, Capel Quarry\, Gorslas\,\, Llanelli\, SA14 7NH
ATTACH;FMTTYPE=image/jpeg:https://acopgroup.com/wp-content/uploads/2019/12/OEMF5678.jpg
ORGANIZER;CN="ACOP Group":MAILTO:sion@acopgroup.com
END:VEVENT
END:VCALENDAR